You can evaluate the following tests:

• Plastic limit
• Liquid limit

Capabilities:

• Input of max. 16 single tests
• Mould weights for water content determination can be defined via a database
• Manual value pair (blow number/water content) input possible
• Consideration of oversize components
• Liquid limit determination according 
• Casagrande or to the falling cone method
• Determination of plastic limit possible using empirical equations or with machine correction factor
• Choice of presentation of consistencies to DIN EN ISO 14688-2
• Choice of presentation of plasticity diagram to DIN EN ISO 14688-2, DIN 18122, ASTM or BS 5930
• Shrinkage limit presentation possible
• Choice of designations compliant with Austrian ÖNorm B 4411
• Result output table
• User-designed output sheet
• Print or copy screen sections, e.g. for transfer to a word processor
• Integrated Mini-CAD system for additional annotation of graphics

Current updates & changes

• 6.08 (20.06.2022)

  • Number of decimal places for liquid and plastic limit

• 6.07 (20.04.2022)

  • Bugfix: Possible error in print output removed.

• 6.06 (11.02.2020)

  • Bugfix: Section 6.4 Plastic limit deviation at 2% and 5%

   

• 6.05 (31.01.2020)

  • DIN EN ISO 17892-12:
    Section 6.1 Corrected water content
    Section 6.3 Relative 5 percent deviation for liquid limit
    Section 6.4 Plastic limit deviation at 2% and 5%

   

• 6.04 (08.10.2019)

  • Prodcut management