GGU-3D-SSFLOW
Capabilities:
- Powerful mesh generator with mesh refinement and mesh optimisation
- Import of ASCII data
- FEM mesh coordinates can be imported from a table via the Windows clipboard
- Consideration of phreatic lines and unsaturated zones
- Graphics controlled input and editing of boundary conditions, e.g. potentials, single, line and area sources)
- Definition of layer boundaries using fixed values or an interpolation mesh (ASCII data import from the GGU-GEO-GRAPH program)
- Graphically oriented data input and editor for fixed boundary conditions such as potentials and point, linear or area sources
- Adopts standard values for kr = f(u)
- Easy-to-use evaluation routines
- Dynamic damping
- Colour supported presentation of results such as coloured contour lines or 3-dimensional models, flow lines, discharges
- Presentation of vertical sections for individual planes/layers
- Fence diagram with velocities and gradients
- Calculates a differential contour diagram from two existing groundwater models
- Results output table with velocities and gradients
- Automatic transfer of steady-state data to the GGU-3D-TRANSIENT program for transient analysis
- Autosave function
- User-defined design of output sheet
- Print or copy screen sections, e.g. for transfer to a word processor
- Integrated Mini-CAD system for additional annotation of graphics
Current updates & changes
6.09 (02.12.2021)
- Product management
6.08 (02.02.2021)
- Product management
6.07 (29.10.2020)
- 'Coloured contours': Colour bar font size can be defined.
6.06 (21.01.2020)
- Product management
6.05 (30.09.2019)
- Product management
Show all entries
Online-Shop:
All prices incl. VAT
Information about our licenses
Simple and secure processing!
During the further order process you switch to the store system of our technology partners "WIBU Systems" and "cleverbridge". You can find out more about these companies under the following links.
![]() | ![]() |
Additional information:
System preferences
GGU-Software runs on PCs with the following specifications:
- Pentium III or higher processor
- Microsoft Windows® 8, 8.1, 10 and 11 compatible
- 500 MB free hard disk space
- DVD-ROM drive or internet connection (for installation)
- USB Interface 2.0 or higher (for licence CmStick dongle)
- CmActLicences NOT on virtual maschines
1.410,15 €
incl. VAT
365 days rent
- Free support
- Always current versions
- Dongle license binding
- Central licensing
- Supports virtual PCs
- Automatic license distribution
- Access via network/VPN
- Ends automatically
- Access for teams
940,10 €
incl. VAT
365 days subscription
- Free support
- Always current versions
- License binding to PC
- Software based license
- One program user
- Automatic renewal
- Annually cancelable
338,00 €
incl. VAT
30 days rent
- Free support
- Always current versions
- Dongle license binding
- Central licensing
- Supports virtual PCs
- Automatic license distribution
- Access via network/VPN
- Ends automatically
- For peak workloads in the team
240,00 €
incl. VAT
10h PayPerUse
- Free support
- Always current versions
- License binding to PC
- Software based license
- One program user
- Usage time by the minute
- All programs included
- Ends automatically
- Ideal for home office
Webinars & Videos

Webinar
Hydraulic Heave and Uplift in Excavations (27min)
In the case of more complicated geometries and difficult groundwater conditions, it is possible to investigate hydraulic heave and uplift in excavations using GGU-3D-SSFLOW and GGU-UPLIFT.
Our expert Prof. Dr. Uwe Glabisch will provide you with informations on how to use the programs and how to calculate and evaluate results. You can watch the video recording of this webinar free of charge after you have registered with your name and e-mail address.