Updates & Changes

• Bugfix: Apend file for different partial masses (DIN EN 933-1)

• Product management

• Permeability determination after Wittmann.

• "Check grading curve range": 0,5 % deviation implemented.

• Grading curve presentation according to DIN 1045
• 2nd grading curve range can be displayed.
• Signature can be assigned to a GSD.

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

• Product management

• Bugfix: Soil type according to DIN EN ISO 14688-1:2020-11.

• Product management

• Product management

• GSD editor can be called up with the designation instead of the no.

• DIN EN ISO 14688-1:2020-11 implemented (abbreviations of soil types).

• Several files can be selected using "File/Append file" menu item.

• Program maintenance

• Printing works again via the icon bar

• Data output in XML format

• Product management

• Program maintenance

• Bugfix: "Check grading curve range"

• Product management

• "No kf value" can be selected via kf value output preferences.

• Product management.

• Product management

• Bugfix: "Open GSDs as extra GSDs" and hydrometer analysis data present.
• Sieve analysis with partial mass before wet sieving now also with hydrometer analysis.
• Reference on DIN EN 933-1

• "Check grading curve range" implemented.

• Bugfix: Input sieve analysis with partial mass: A differentiation is now made between partial sieving before and after wet sieving.

• Input sieve analysis with partial mass now with sieve loss.

• Permeability formula can be set separately for each grain distribution.
• Automatic search for valid permeability formulas.
• Search order can be adjusted.
• Representation of the highest, lowest or average permeability, if several permeability formulas are permissible.
• Input sieve analysis with partial mass revised.

• Display of sheet borders can be suppressed.

• Bugfix: Possible error in print output removed.

• Mini-CAD: Selection layer definition improved.
• Print output: 'Print page 1 only' check box added.

• Product management: Extra GSDs

• Product management

• Product management

• Bugfix: Sieving input via summed

• Components with stones

• Product management

Bugfix: Soil group, if wl and Ip are entered.

• Permeability after Kaubisch without validity rule revised.

• Permeability determination after Kaubisch, Zieschang and Seiler now also without validity rules.

• Bugfix: Read company data, if font size <= 0.0

• Bugfix: Extra GSDs and hydrometer analysis to DIN EN ISO 17892-4:2017-04

• Bugfix: Load sieve set automatically

• Screen visualisation accelerated.

• Bugfix: Edit grain size curve graphically, if hydrometer analysis was carried out to EN ISO 17892-4:2017-04
• Mini-CAD: Layer designations can be defined.

• DIN EN ISO 17892-4:2017-04 completely new
• PDF import implemented.
• Number of sieves increased to 18.

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

• Product management

• Validity rules after USBR and Seelheim can be deactivated.

• Bugfix: d25 determination and k-value after Seiler

• Soil group with fill symbol

• Bugfix: Determination soil type

• productmanagement

• Determination of Kaubisch permeability adapted.

• Product Management

• New equations for determining permeability using the grain size distribution to MAK 2013.
• Application limits for k-value after Seelheim added.
• Uniformity coefficient renamed from U to Cu

• new program version: Minimum grain size for grading curve can be modified.

• Bugfix: "Load extra GSDs"

• Bugfix: Error message during sieving data input if 'Values as residue' is activated.

• Product management

• Project now has three input lines.

• Soil groups to ASTM 2487-11

• Bugfix: Pan determination for cumulative weighing.

• Determination of d10, d15, d60 etc. optimised.

• Product management

• Suffosion safety after Kenney/Lau and Burenkova.
• Generate Fuller curve
• Undo function implemented.

• Suffosion: The grading curves can now also be separated based on the grain diameter.

• Filter stability implemented.

• Bugfix: Open/Save dialog box in Vista and Windows 7.

• Number of Extra GSDs increased to 50.
• Extra GSDs can now be imported from several existing datasets.

• To comply with EN ISO 14688-1 the maximum grain diameter can now also be defined as 1,000 mm. Determination of soil type then also includes blocks (Bo). Stone-block boundary is at 200 mm.

• New Features

• New Features

• Output of file name in the "General" legend for "Batch print"

• Soil type designations to DIN EN ISO 14688-1 implemented.

• Very old records (Extra GSDs) can now be imported again.

• 'Draw Mini-CAD elements first' implemented.

• Max. grain size '500mm' implemented.

• ASTM implemented.

• 'Suffosion' module improved.

• Cancel button in main sieving dialogue implemented.

• Very old records (Extra GSD) can now be imported again.

• "Export as ASCII" implemented.

• Separation of 2 GSD´s for suffosion calculations.

• 2 additonal grain diameters d at x% implemented.

• Gravel-stone boundary can now also be defined as 63 mm.

• Undo function improved for arrangement of graphic elements.

• When mixing GSDs only the "clicked" sieve diameters are now examined.

• No. of decimal places in output table can be specified for tray.

• Mixing of several grain size distribution sievings implemented.

• For sieving with partial mass the residue in the pan can now also be calculated.

• Batch print implemented.

• For the determination of frost resistance the "limit silt/sand at 0.063 mm" can be used.

• If the silt/sand boundary is selected at 0.063 mm, this diameter will be used to determine the soil group.

• No soil group display for fine grained soils (UL, UM, UA, TL, TA) if the plasticity index or liquid limit <= 0.0.

• d10/d30/d60 can be displayed in the table.

• Mini bugs fixed.

• All graphic elements positionable (incl. in protocol).

• Page format can be edited in almost any way.

• Positioning of individual sections improved in diagram table.

• Width of text field in diagram table can be edited.

• Company, processor, remarks with "Automatic position".

• Automatic font size adjustment when "running over" element edges.

• Separate appendix numbers in the protocols.

• Sum weights for sieving implemented.

• Partial mass for sieving implemented.

• New Mini-CAD implemented.

• "Copy area" icon for export of graphic elements to, e.g., "Word" implemented.

• 0.063 mm limit selectable for silt-sand boundary.