Updates & Changes

Here is an overview of all updates and changes to our software packages. Please subscribe to our newsletter if you would like to be notified automatically about changes and bug fixes.

To the current installation routines

 

SoftwareVersion
GGU-AXPILE8.03 / 7.24
  • Bugfix: Tension pile and G governing: Rd = Gd and not Rd = Gd / gam(p).
22.03.2024
GGU-AXPILE8.02
  • GGU-CONNECT ready
  • Grouted ductile driven pile revised.
06.03.2024
GGU-AXPILE8.01 / 7.23
  • Bugfix: Model factor eta(s) Closed steel tube
31.08.2023
GGU-AXPILE8.00
  • Ratio value (min., max.) can be entered separately for each soil.
  • Grouted ductile driven pile implemented.
    Beta phase: Data in the annual report 2022 are not complete.

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

05.07.2023
GGU-AXPILE7.22
  • Design situation 'DS-E' according to current standard now 'DS-A/DS-E'
  • Design situation 'DS-E(old)' added.
14.03.2023
GGU-AXPILE7.21
  • Requirement for minimum pile length removed. Is not included in the current EA piles.
09.05.2022
GGU-AXPILE7.20
  • Bugfix: Soil properties legend for tubular driven piles with D >= 1.5 m.
11.03.2022
GGU-AXPILE7.19
  • Product management
24.01.2022
GGU-AXPILE7.18
  • Bugfix: Representation R,d for tension piles and weight decisive.
01.12.2021
GGU-AXPILE7.17
  • Product management
14.09.2021
GGU-AXPILE7.16
  • Product management
07.09.2021
GGU-AXPILE7.15
  • Product management
07.06.2021
GGU-AXPILE7.14
  • Product management
07.05.2021
GGU-AXPILE7.13
  • Bugfix: Greek letters and "copy area"
06.04.2021
GGU-AXPILE7.12
  • Bugfix: Rectangular driven pile and activated check box "Adopt 2014 annual report".
23.02.2021
GGU-AXPILE7.11
  • Calculation for non-load-bearing soil (end resistance) can be allowed.
04.01.2021
GGU-AXPILE7.10
  • Product management: Tension piles
04.11.2020
GGU-AXPILE7.09
  • Bugfix dimension spring stiffness
07.10.2020
GGU-AXPILE7.08
  • Spring stiffness in output table
30.09.2020
GGU-AXPILE7.07 / 6.27
  • Bugfix Tension pile: Model factors implemented.
23.03.2020
GGU-AXPILE7.06
  • Product management
 
09.03.2020
GGU-AXPILE7.05
  • Product management
 
11.02.2020
GGU-AXPILE7.04
  • Surcharge factor renamed adjustment factor.
 
21.01.2020
GGU-AXPILE7.03
  • Recommendations on Piling: Alternative method for determination of the pile base resistance implemented.
 
08.11.2019
GGU-AXPILE7.02
  • Bugfix: 2014 annual report and closed steel tube
10.09.2019
GGU-AXPILE7.01
  • Product management
 
20.02.2019
GGU-AXPILE7.00
  • 2014 EAP annual report implemented.
  • PDF import implemented.
  • Mini-CAD: Layer designations can be defined.
  • Expandable database with soil properties for common soils.
  • Screen visualisation accelerated.

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

 
14.02.2019
GGU-AXPILE6.26
  • Revision of tension pile if weight of pull-out cone is governing.
  • Producrt management
 
07.02.2019
GGU-AXPILE6.25
  • Bugfix: Tension pile if weight of pull-out cone is governing
 
05.11.2018
GGU-AXPILE6.24
  • Product management
29.10.2018
GGU-AXPILE6.23
  • Bugfix: Determination of D(eq) double steel girder section
25.10.2018
GGU-AXPILE6.22
  • product management
 
31.08.2017
GGU-AXPILE6.21
  • product management
09.02.2017
GGU-AXPILE6.19
  • Bugfix: Calculate utilisation factor for single pile
 
26.01.2017
GGU-AXPILE6.20
  • Text for absolute heights can be entered.
26.01.2017
GGU-AXPILE6.18
  • product management
27.10.2016
GGU-AXPILE6.17
  • product management
19.08.2016
GGU-AXPILE6.16
  • Force unit now also in kN
  • product management
24.05.2016
GGU-AXPILE6.14
  • Abbreviations explanation below output table
13.05.2016
GGU-AXPILE6.13
  • product management
10.05.2016
GGU-AXPILE6.12
  • Menu item 'Ground level' implemented with
05.10.2015
GGU-AXPILE6.11
  • Bugfix: Utilisation factor: Single pile as tension pile
02.10.2015
GGU-AXPILE6.10
  • Programm management
27.10.2014
GGU-AXPILE6.09
  • Bugfix: Determination of R,k and R,d if R(E,k) is determined via allowable settlement.
29.04.2014
GGU-AXPILE6.08
  • Bugfix: F,E,k entry in resistance-settlement diagram.
13.12.2013
GGU-AXPILE6.07
  • Bugfix: Single pile with actions and specified allowable settlement.
16.10.2013
GGU-AXPILE6.06
  • Single pile: actions can be defined and the associated utilisation factor calculated.
20.08.2013
GGU-AXPILE6.05
  • Product management
06.08.2013
GGU-AXPILE6.04
  • Bugfix: Model factors for 'Open steel tube and hollow box'
 
08.01.2013
GGU-AXPILE6.03
  • Program updated
  • Model factors for 'steel girder section, double steel girder section and closed steel tube' adapted to Piling Recommendations (EAP), 2nd German Edition (Table 5.5).
 
12.12.2012
GGU-AXPILE6.03
  • Model factor for 'Open steel tube and hollow box' for diameters < 0.3 m can no longer become greater than '1.0'.
 
12.12.2012
GGU-AXPILE6.02
  • Model factors for 'Open steel tube and hollow box' adapted to Piling Recommendations (EAP), 2nd edition (Table 5.5).
 
18.10.2012
GGU-AXPILE6.01
  • Product management
 
26.04.2012
GGU-AXPILE6.00
  • Partial safety factors to Eurocode 7
 
06.03.2012
GGU-AXPILE5.10
  • Bugfix: Single pile result legend
 
05.05.2011
GGU-AXPILE4.08
  • Bugfix: Single pile result legend
 
05.05.2011
GGU-AXPILE5.09
  • Bugfix: Open/Save dialog box in Vista and Windows 7.
 
11.02.2011
GGU-AXPILE4.07
  • Bored pile bugfix: Output of s(sg) and s(020) in legend and dialogue box for 'single pile' and large pile lengths. No impact on result.
 
25.05.2010
GGU-AXPILE5.07
  • Bored pile bugfix: Output of s(sg) and s(020) in legend and dialogue box for 'single pile' and large pile lengths. No impact on result.
 
25.05.2010
GGU-AXPILE5.06
  • EAP + partial displacement bored pile: determination of thickness of load-bearing zone below pile toe for diameters <= 0.50 m
 
07.04.2010
GGU-AXPILE4.06
  • EAP + partial displacement bored pile: determination of thickness of load-bearing zone below pile toe for diameters <= 0.50 m
 
07.04.2010
GGU-AXPILE5.04
  • Mini-CAD Version 7.10
 
15.03.2010
GGU-AXPILE5.05
  • Mini-CAD Version 7.10
 
15.03.2010
GGU-AXPILE5.03
  • Calculation of perimeter of 'double steel girder section'
 
02.10.2009
GGU-AXPILE4.05
  • Calculation of perimeter of 'double steel girder section'
 
02.10.2009
GGU-AXPILE5.02
  • Maximum allowable height to width ratio increased for precast driven piles.
 
30.09.2009
GGU-AXPILE5.01
  • New partial factor to DIN 1054 Corrigendum 4 (Oct 2008)
 
29.10.2008
GGU-AXPILE4.04
  • Settlement curve visualisation improved.
 
18.04.2008
GGU-AXPILE4.03
  • Input of gamma for tension piles according to EAP
 
29.01.2008
GGU-AXPILE4.02
  • The correct value is now entered into the output table with "R,d".
 
20.11.2007
GGU-AXPILE4.01
  • New standard: output table either with "R,d" or "Allow. V"
 
24.09.2007
GGU-AXPILE4.00
  • EAP and very many improvements implemented.
 
09.07.2007
GGU-AXPILE3.03 a
  • Bugfix: Input of user-defined axis values for length variation.
 
31.05.2005
GGU-AXPILE3.02 a
  • Automatic reduction of end resistance to 75% for belled piles possible.
 
15.02.2005
GGU-AXPILE3.02 b
  • Limitation to allowable settlement now also for new standard.
 
15.02.2005
GGU-AXPILE3.02 c
  • Driven pile design new tabular values (C.2) in DIN 1054 (Jan. 2005) added.
 
15.02.2005
GGU-AXPILE3.01 a
  • "Soil properties" dialogue box optimised.
 
29.01.2004
GGU-AXPILE3.00 a
  • New main version 3.0!
 
14.12.2003
GGU-AXPILE3.00 c
  • Driven pile designing to Tables C.1 + C.2 in DIN 1054.
 
14.12.2003
GGU-AXPILE3.00 b
  • New DIN 1054 implemented.
 
04.12.2003
GGU-AXPILE2.23 a
  • For negative allowable V-values, the corresponding values in the table are marked in red.
 
09.04.2003
GGU-AXPILE2.23 b
  • Save/Load in the soil properties table now with soil designation.
 
09.04.2003
GGU-AXPILE2.22 a
  • General cosmetics.
 
22.02.2002
GGU-AXPILE2.21 a
  • Batch print implemented.
 
08.10.2001
GGU-AXPILE2.20 a
  • Absolute heights implemented.
 
11.11.2000
GGU-AXPILE2.10 a
  • Pull-out radius can be limited.
 
06.02.2000
GGU-AXPILE2.00 a
  • New Mini-CAD implemented.
 
10.03.1999
GGU-AXPILE1.11 a
  • "Copy area" symbol for export of graphic elements to e.g. "Word" implemented.
 
08.02.1999

Filter