Updates & Changes

Here is an overview of all updates and changes to our software packages. Please subscribe to our newsletter if you would like to be notified automatically about changes and bug fixes.

To the current installation routines

 

SoftwareVersion
GGU-ATTERBERG7.06
  • Batch processing from GGU-CONNECT is supported.
  • Further GGU-CONNECT placeholders available.
15.03.2024
GGU-ATTERBERG7.05
  • Product management
22.01.2024
GGU-ATTERBERG7.04
  • Integration with GGU-CONNECT: Pre-filling of files with templates, placeholders and data from GGU-CONNECT.
  • Integration with GGU-CONNECT: Transfer of Versuschsergebnis values to GGU-CONNECT.

 
 

08.09.2023
GGU-ATTERBERG7.03

  • Program maintenance

03.08.2023
GGU-ATTERBERG7.02
  • Program maintenance
21.07.2023
GGU-ATTERBERG7.01
  • Bugfix: Plasticity diagram to DIN 18196::2023-02 and wL > 100%
12.07.2023
GGU-ATTERBERG7.00
  • Plasticity diagram according to DIN 18196::2023-02

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

04.07.2023
GGU-ATTERBERG6.09 / 2023.1
  • Translation consistency
06.03.2023
GGU-ATTERBERG6.09
  • Cross mark in the plasticity diagram in red
19.07.2022
GGU-ATTERBERG6.08
  • Number of decimal places for liquid and plastic limit
20.06.2022
GGU-ATTERBERG6.07
  • Bugfix: Possible error in print output removed.
20.04.2022
GGU-ATTERBERG6.06
  • Bugfix: Section 6.4 Plastic limit deviation at 2% and 5%
 
11.02.2020
GGU-ATTERBERG6.05
  • DIN EN ISO 17892-12:
    Section 6.1 Corrected water content
    Section 6.3 Relative 5 percent deviation for liquid limit
    Section 6.4 Plastic limit deviation at 2% and 5%
 
31.01.2020
GGU-ATTERBERG6.04
  • Prodcut management
08.10.2019
GGU-ATTERBERG6.03
  • Product management
02.09.2019
GGU-ATTERBERG6.02
  • Falling cone test to DIN EN ISO 17892-12:2018 implemented.
 
25.02.2019
GGU-ATTERBERG6.01
  • Screen visualisation accelerated.
 
14.02.2019
GGU-ATTERBERG6.00
  • Plasticity diagram according to DIN EN ISO 14688-2 2018
  • PDF import implemented.
  • Mini-CAD: Layer designations can be defined.

Info: Paid major update (free of charge for licensees with subscription or update insurance under the software service agreement)

24.01.2019
GGU-ATTERBERG5.16
  • Bigfix: Product management
21.08.2018
GGU-ATTERBERG5.15
  • product management
07.11.2017
GGU-ATTERBERG5.14
  • product management
24.05.2016
GGU-ATTERBERG5.13
  • Shrinkage limit and thus 'very stiff' consistency can be entered.
09.08.2013
GGU-ATTERBERG5.12
  • Project now has three input lines.
13.06.2013
GGU-ATTERBERG5.11
  • Designations in plasticity diagram according to DIN 18196:2011-05
11.01.2013
GGU-ATTERBERG5.10
  • Data input improved.
07.11.2012
GGU-ATTERBERG5.02
  • Bugfix: Open/Save dialog box in Vista and Windows 7.
11.02.2011
GGU-ATTERBERG5.0
    New Features
24.09.2008
GGU-ATTERBERG4.31 a
  • "Export as ASCII" implemented.
26.11.2005
GGU-ATTERBERG4.30 a
  • Consistency according to DIN EN ISO 14688-2 implemented.
03.09.2005
GGU-ATTERBERG4.20 a
  • Designation from ÖNORM B 4411 implemented.
12.03.2005
GGU-ATTERBERG4.10 a
  • Undo function improved for arrangement of the graphic elements.
04.04.2003
GGU-ATTERBERG4.01 a
  • Batch print implemented.
08.10.2001
GGU-ATTERBERG4.00 a
  • Container weights definable via data base.
12.10.2000
GGU-ATTERBERG3.00 a
  • All graphic elements moveable.
07.11.1999
GGU-ATTERBERG3.00 b
  • Table in main page only, no more protocol.
07.11.1999
GGU-ATTERBERG3.00 c
  • Page format editable.
07.11.1999
GGU-ATTERBERG3.00 d
  • Text for "Test number" etc. can be switched off.
07.11.1999
GGU-ATTERBERG2.01 a
  • Plastic limit with empirical formula.
29.04.1999
GGU-ATTERBERG2.00 a
  • New Mini-CAD implemented.
10.03.1999
GGU-ATTERBERG1.43 a
  • "Copy area" symbol for export of graphics to, e.g., "Word" implemented.
17.02.1999

Filter