Nivelties in the Mini-CAD module

Geotechnical Software - News

   

August 2017

New: Test all GGU-Software applications 
without a CmStick-dongle for 7 days*

Start your test in just some minutes on your personal computer

* Only available outside Germany, Austria and Switzerland

----------------------------------------------------

New: "Subsrciption" Licence Option without CmStick
*

For licence subscriptions (1 Year) we provide a local licence (Non Network) with a software key. The following conditions apply: 
- The software can only be used on one computer.
- If you buy a new computer, the soft licence can be transfered
- The software licence is not usable on virtual maschines!

* Only available outside Germany, Austria and Switzerland

----------------------------------------------------

New: PayPerUse now without CmStick
Try our licence model "PayPerUse"! *


With PayPerUse licences you can 
use ALL GGU-Software programs always
in the latest version on a time basis

PayPerUse time 
10 hours Non Network Licence: 190 Euro 


LICENCE OPTIONS: 

- The software can only be used on one computer.
- The software licence is not usable on virtual maschines!
- No licence transfer to a new computer 

* Only available outside Germany, Austria and Switzerland



14.09.2016

New program versions for

GGU-RETAIN 9

GGU-LATPILE 7

GGU-STABILITY 12

 

Feb 2015

New program versions for

GGU-STRATIG 10

 

Sept 2014

New program versions for

GGU-LATPILE 6

GGU-GABION 6

GGU-CANTILEVER 3

GGU-STABILITY 11

GGU-UNDERPIN 7

GGU-SETTLE 4

GGU-SLAB 9

 

May 2014

New program versions for

GGU-RETAIN 8

GGU-UPLIFT 6

GGU-FILTER-STABILITY 2

GGU-SIEVE 15

 

July 2012

Steel analysis using EC 3 for

- GGU-RETAIN 7

- GGU-LATPILE 5

 

May 2012

PayPerUse Promotion

Try the newest licence modell "PayPerUse" and buy a "CmStick" licence dongle including a 10 hours licence code.

With a PayPerUse licence you can use ALL GGU-Software programs on a time basis!

Starter-Pack

Aditional PayPerUse licences

 

May 2012

New version GGU-SEEP 9.00

 

March 2012

New programs with EuroCode EC7:

- GGU-CANTILEVER 2

- GGU-FOOTING 7

- GGU-STABILITY 10

- GGU-TRENCH 8

- GGU-SLOPE-PILE 3

- GGU-LATPILE 5

- GGU- GABION 5

- GGU- UNDERPIN 6

- GGU-RETAIN 7

- GGU-AXPILE 6

- GGU-SLICE 6

- GGU-UPLIFT 5

 

October 2011

new program GGU-FILTER-STABILITY 1.0

June 2010

new program GGU-SHRINKAGE 1.0

new program GGU-GRAIN-DENSITY 1.0

 

January 2010

New CodeMeter Firmware 1.15
As a GGU-Software applications customer you already use the silver-coloured CodeMeter stick for your GGU licences.

With immediate effect, benefit from our new Firmware 1.15 for CmSticks withthe serial numbers 1-xxxxxx (p/n 1001-01, 1010-01, 1011-xx, 1020-01,1030-01). Beyond some minor changes for the support of new CmStick/M flashmemory chips, compared to the previous version 1.14 some improvements areincluded.Reliability has been increased by an improved management on exchangingoverused memory cells for heavy use of unit counters; unnecessary failure isavoided by an improved detection process of hardware attacks, and theprevention of involved hardware locking due to false-positives. In addition,the improvement of the locking behaviour (FULA)of constantly connectedCmSticks/M (p/n 1011-02-xxx)is featured. An update to this version is recommended; with it you reduce a failure risk.How to get the Firmware update? In the CodeMeter Control Center click theupdate button right to the "Version" information. Do not hesitate to contactus in the case questions may occur. We are as usual gladly at your service.


May 2009

New licensing model; GGU-Software now available on lease

Some engineering services are only in demand very infrequently. This means it can make more sense and be more cost-effective to lease the appropriate software for a limited period. We have reacted to this demand and expanded our palette for you. With immediate effect it is also possible to lease GGU-Software via our business partner WIBU-SYSTEMS AG. WIBU-SYSTEMS AG operates the CodeMeter licence shop together with their partner Cleverbridge AG.

GGU-Software leasing is available exclusively via the CodeMeter licence shop. You will need either an existing or new CodeMeter stick to enable the licence (not included in lease or licence price).

The current lease prices are shown on the respective product pages and linked to the shop.

CodeMeter online shop

 

September 2008

Complete new software suite with better MiniCAD modules

 

new program GGU-VIBRATION 1.0

 

 

new program GGU-SLOPE-PILE 2.0

 


Please visit our website from Civilserve.